TS410 petrol cut-off machine.
Please note this machine is not supplied with a diamond blade. See acessories below for suitable diamond blades.
ONLY AVAILABLE FOR DELIVERY IN EAST ANGLIA (NR, IP, CO, CB, PE & CM POSTCODES), OR COLLECTION FROM OUR NORWICH STORE.
Compact and robust, the STIHL TS 410. Long-life filter system with cyclone pre-separation makes on site maintenance unnecessary. Extremely low vibration levels (3.9m/s²). High performance engine with stratified charge system. Compact design and optimised balance for excellent cutting and guide characteristics. For use with 300mm cutting wheel. ElastoStart, primer pump and decompression valve. Bayonet filler cap for tool free opening. Can be hand held or used with the FW 20 cart. Supplied with abrasive cutting wheel.
|Vibration value, right m/s2 1)||3.9|
|Sound pressure level dB(A) 2)||98|
|Sound power level dB(A) 2)||109|
|Vibration value, left m/s2 1)||3.9|
|Tank volume l||0.71|
|Sound pressure level dB(A) 3)||98.0|
|Sound power level dB(A) 3)||109.0|
|Vibration levels left/right m/s² 4)||3.9/3.9|
|Cutting wheel mm/in||300 / 12|
1) K-factor according to DIR 2006/42/EC = 2m / s ²
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) Power factor according to DIR2006/42/EC=2.5(dB(A))
4) (K) factor according to Dir. 2006/42/EC = 2m/s²
The engine requires a mix of petrol and engine oil. Simply mix a Stihl 50:1 two-stroke engine oil with unleaded (95 octane) petrol. The simplest method is using a standard 5 litre fuel canister and to add 0.1 litres (100 ml) of Stihl HP 2 stroke oil, close and thoroughly shake the canister and the mix is ready to use.
For this machine we recommend either Stihl HP or Stihl HP Ultra engine oil.